 |
Simrad AC85 Autopilot Computer  FREE SHIPPING available for this item when using UPS Ground. # de Modelo: 000-10189-001 Descripcion: Simrad AC85 Autopilot Computer - Configurable autopilot computer cabinet with space for up to 3x AD80, SD80 or AC70 PCBs. Ships with one SI80 card. AC85 Autopilot Computer - Configurable autopilot computer cabinet with space for up to 3x AD80, SD80 or AC70 PCBs. Ships with one SI80 card - Add PCBs according to installation requiremenents from Accessories tab. SI80 board (Mandatory) A four channel NMEA 0183 interface computer board and voltage supply for CAN bus. Includes: SIMNET TERMINATION - Switch for CAN bus termination ON/OFF SIMNET - SimNet 15 V out REMOTE - Input for NFU steering lever NMEA 0183 CH.. - 4 i/o NMEA/IEC 61162-1/IEC 61162-2 channels SUPPLY - power supply 12/24 V in AD80 board (Optional) Drive computer board for rudder or thruster, supporting analog voltage or low current signals for angle or proportional control. Includes: UI CRTL - output for analog voltage low current command RUD UI - Input for analog (voltage or current) rudder feedback RUD FRQ - Input for frequency rudder feedback READY - output for ready contact when board is up running ready for control HS1 - Generic in/out handshake signal port 1 HS2 - Generic in/out handshake signal port 2 MODE - Input for external mode selector SIMNET - connection to CAN network SD80 board (Optional) Drive computer board for rudder or thruster, supporting galvanic isolated solenoids or high current signals for angle or proportional speed control. Includes: RUD UI - Input for analog voltage or current rudder feedback RUD FRQ - Input for frequency rudder feedback SOLENOIDS - Galvanic isolated output for solenoid command ENGAGE - For operating bypass or dual speed valve, clutch etc for hydraulic or mechanical drive units READY - output for ready contact when board is up running ready for control HS1 - Generic in/out handshake signal port 1 HS2 - Generic in/out handshake signal port 2 MODE - Input for external mode selector SIMNET - connection to CAN network AC70 board (Optional) Drive computer board for rudder or propeller (i.e. Voith Schneider) for reversible motor (non-IMO) or galvanic non-isolated solenoids (Non-IMO). Includes: SUPPLY - power supply 12/24 V in DRIVE - output for Motor or solenoid command DRIVE ENGAGE - output for clutch/bypass valve or automode signal for oil flow valve etc ALARM - Output for external alarm buzzer NMEA 0183 - in/out for IEC 61162-1, -2 and NMEA 0183 RUDDER - Input for frequency rudder feedback REMOTE - Input for NFU steering lever MODE - Input for external mode selector SIMNET - connection to CAN network Peso de Carga: 15 lbs. Venta al por menor: $2200.00 Nuestro Precio: $1869.99 You Save 16% Contactenos Telefono: 305-444-3911 Fax: 305-444-3912 Email: info@marinewholesales.com |
|